Howard Miller Carmen wrought iron wall clock with cast decorative corner ornaments finished in warm gray, dusty wax highlights. Windsor Cherry finished wood columns provide a warm accent on each side. Convex glass covers the antique dial, which offers black Roman numerals and serpentine hands. The swinging pendulum is finished in warm gray with dusty wax highlights to match the case. Quartz, non-chiming battery operated movement.
Go to bed with positive thoughts. Tell yourself, “I want to get up early because…” and then, actually do it. Sleep studies happen all the time, and they tell us what exterior activities are affecting our dreams, our nightmares, etc., and talking to yourself as you drift off to bed has been proven to work. If you’re looking forward to something in the morning, tell yourself about it, and your body will hold onto that through the night.
An artful accent is all your need to take your entertaining space from every day to eye-catching. While low-slung sofas and a plush shag rug make a fine foundation, you can effortlessly dress it all up by centering this chic clock on the wall above. Pairing brushed aluminum metal with walnut-finished wood panels, this sunburst-inspired piece is brimming with mid-century style. Let it shine solo above an exposed light bulb lamp sitting on an end table so you can watch the time at your pre-dinner...

Showcasing the time, date, and weather, this clock is an essential for any desk. No need to lift your arm and look at your watch or light up your phone screen, this 0.3'' H x 3.7'' W x 1.5'' D design is an easy way to get the info you need. A vibrant blue backlight keeps it illuminated (requiring the power of a AA battery), while a plastic frame allows it to stand upright.
If you're outfitting your new home or apartment, check out more of our great buying guides like the best bar stools, the best light bulbs, the best coffee tables, the best area rugs, the best mattress toppers, the best sheets, the best mattresses, the best pillows, the best clothes hangers, the best cordless vacuum cleaners, the best laundry baskets and hampers, and the best home security cameras you can buy.
Don't settle for a simple wall clock to merely ensure you’re on time. Bring both function and French flair to your space with this oversized 29" oval wall clock. Made from manufactured wood, it showcases a typographic motif in the center that reads "Antiquite de Paris 1887" for a dash of antique inspiration. Classic Roman numerals and spade-style hands help you keep an eye on the hour, while a distressed finish completes the design with well-worn charm. Once you pop in a battery (not...
In a master clock system, electricity is used to give direct impulses to the pendulum, which in turn causes the clock’s gear train to move, or to lift a lever after it has imparted an impulse to the pendulum. In various modern master clocks the pendulum operates a light count wheel that turns through the pitch of one tooth every double swing and is arranged to release a lever every half minute. This lever gives an impulse to the pendulum and is then restored to its original position by an electromagnet. The pulse of current that operates the electromagnet can also be transmitted to a series of distant dials, or slave clocks, advancing the hands of each through the space of a half minute. Thus, a master clock can control scores of dials in a large group of buildings, as well as such other apparatus as time recorders and sirens.

The British had predominated in watch manufacture for much of the 17th and 18th centuries, but maintained a system of production that was geared towards high quality products for the elite.[44] Although there was an attempt to modernise clock manufacture with mass production techniques and the application of duplicating tools and machinery by the British Watch Company in 1843, it was in the United States that this system took off. In 1816, Eli Terry and some other Connecticut clockmakers developed a way of mass-producing clocks by using interchangeable parts.[45] Aaron Lufkin Dennison started a factory in 1851 in Massachusetts that also used interchangeable parts, and by 1861 was running a successful enterprise incorporated as the Waltham Watch Company.[46][47]

A major stimulus to improving the accuracy and reliability of clocks was the importance of precise time-keeping for navigation. The position of a ship at sea could be determined with reasonable accuracy if a navigator could refer to a clock that lost or gained less than about 10 seconds per day. This clock could not contain a pendulum, which would be virtually useless on a rocking ship. In 1714, the British government offered large financial rewards to the value of 20,000 pounds,[42] for anyone who could determine longitude accurately. John Harrison, who dedicated his life to improving the accuracy of his clocks, later received considerable sums under the Longitude Act.
With the application of the synchronous electric motor to clocks in 1918, domestic electric clocks became popular. A synchronous electric motor runs in step with the frequency of the electric power source, which in most countries alternates at 60 hertz (cycles per second). The electric motor is coupled to a reduction gearing that drives the clock hands at the correct rate.
Any expansion or contraction of the rod caused by changes of temperature will affect the timekeeping of a pendulum; e.g., a pendulum clock with a steel rod will lose one second a day for a rise in temperature of approximately 4 °F (2.2 °C). For accurate timekeeping, the length of the pendulum must be kept as nearly constant as possible. This may be done in several ways, some of which use the differing coefficients of expansion (the amount of expansion per degree change in temperature) of different metals to obtain a cancelling-out effect. In one popular compensation method, the bob consists of a glass or metal jar containing a suitable amount of mercury. The gridiron pendulum employs rods of different metal, usually brass and steel, while in the zinc-iron tube the pendulum rod is made of concentric tubes of zinc and iron. An improved method, however, is to make the pendulum rod from a special alloy called Invar. This material has such a small coefficient of expansion that small changes of temperature have a negligible effect and can easily be compensated for if required.
In a clock driven by a weight or a spring, the power is first transmitted by the main, or great, wheel. This engages with a pinion (a gear with a small number of teeth designed to mesh with a larger wheel), whose arbor (a turning rod to which gears are attached) is attached to the second wheel that, in its turn, engages with the next pinion, and so on, down through the train to the escapement. The gear ratios are such that one arbor, usually the second or third, rotates once an hour and can be used to carry the minute hand. A simple 12-to-1 gearing, known as the motion work, gives the necessary step-down ratio to drive the hour hand. The spring or weight is fitted with a mechanism so it can be rewound when necessary, and the arbor carrying the minute hand is provided with a simple slipping clutch that allows the hands to be set to the correct time.

“I bought this light because my partner and I need to be up early for work, but our bedroom has very poor natural light. Within a week, I’ve already noticed a difference in my energy levels and mood. The sunrise simulation works perfectly; by the time the ‘alarm’ (peaceful bird noises) goes off, I’m already feeling naturally awake — not groggy or jolted out of my sleep. I feel much more rested, and my average resting heart rate reflects that. I also really love the sunset feature. I wasn’t expecting to get much use out of it, but I feel like it does a great job of helping me settle into bed at the end of the day.”
×