Although the mechanisms they use vary, all oscillating clocks, mechanical, digital and atomic, work similarly and can be divided into analogous parts.[64][65][66] They consist of an object that repeats the same motion over and over again, an oscillator, with a precisely constant time interval between each repetition, or 'beat'. Attached to the oscillator is a controller device, which sustains the oscillator's motion by replacing the energy it loses to friction, and converts its oscillations into a series of pulses. The pulses are then counted by some type of counter, and the number of counts is converted into convenient units, usually seconds, minutes, hours, etc. Finally some kind of indicator displays the result in human readable form.
The most accurate mechanical timekeeper is the Shortt pendulum clock; it makes use of the movement described above for electric master clock systems. The Shortt pendulum clock consists of two separate clocks, one of which synchronizes the other. The timekeeping element is a pendulum that swings freely, except that once every half minute it receives an impulse from a gently falling lever. This lever is released by an electrical signal transmitted from its slave clock. After the impulse has been sent, a synchronizing signal is transmitted back to the slave clock that ensures that the impulse to the free pendulum will be released exactly a half minute later than the previous impulse. The pendulum swings in a sealed box in which the air is kept at a constant, low pressure. Shortt clocks in observatories are kept in a room, usually a basement, where the temperature remains nearly constant, and under these conditions they can maintain the correct time to within a few thousandths of a second per day.
This farmhouse wall clock measures 30 in. across This farmhouse wall clock measures 30 in. across the face and features horizontal cedar wood slats a white distressed finish hand painted black Roman numerals in a Poster Condensed font and an inner accent ring with individual hour marks. It includes a high torque quartz movement antique-style spade hands and ...  More + Product Details Close
Many devices can be used to mark passage of time without respect to reference time (time of day, minutes, etc.) and can be useful for measuring duration or intervals. Examples of such duration timers are candle clocks, incense clocks and the hourglass. Both the candle clock and the incense clock work on the same principle wherein the consumption of resources is more or less constant allowing reasonably precise and repeatable estimates of time passages. In the hourglass, fine sand pouring through a tiny hole at a constant rate indicates an arbitrary, predetermined, passage of time. The resource is not consumed but re-used.
“Great alarm clock for the price. Gigantic numbers for my old eyes. Very basic, easy to set, just what I wanted. Alarm is loud even on low [with] an awful sound that would wake the dead. But that sound makes me get right up, so it does exactly what it’s supposed to do. If you want a soft gentle caress to wake you, get something else, but this is a good alarm and easy to use.”