The timekeeping element of a quartz clock consists of a ring of quartz about 2.5 inches (63.5 mm) in diameter, suspended by threads and enclosed in a heat-insulated chamber. Electrodes are attached to the surfaces of the ring and connected to an electrical circuit in such a manner as to sustain oscillations. Since the frequency of vibration, 100,000-hertz, is too high for convenient time measurement, it is reduced by a process known as frequency division or demultiplication and applied to a synchronous motor connected to a clock dial through mechanical gearing. If a 100,000 hertz frequency, for example, is subjected to a combined electrical and mechanical gearing reduction of 6,000,000 to 1, then the second hand of the synchronous clock will make exactly one rotation in 60 seconds. The vibrations are so regular that the maximum error of an observatory quartz-crystal clock is only a few ten-thousandths of a second per day, equivalent to an error of one second every 10 years.
“I am the heaviest sleeper and was setting four or five alarms on my phone to wake me up. After being late a few times, I decided to purchase this alarm clock to help me wake up on time. I couldn’t be happier with my purchase. … The bed shaker is super important. I put it under my pillow, and it shook me awake; the loud beep helped too. If you can sleep through earthquakes and shouting family members, this is the alarm clock for you.”