In 1283, a large clock was installed at Dunstable Priory; its location above the rood screen suggests that it was not a water clock. In 1292, Canterbury Cathedral installed a 'great horloge'. Over the next 30 years there are mentions of clocks at a number of ecclesiastical institutions in England, Italy, and France. In 1322, a new clock was installed in Norwich, an expensive replacement for an earlier clock installed in 1273. This had a large (2 metre) astronomical dial with automata and bells. The costs of the installation included the full-time employment of two clockkeepers for two years.
In China, a striking clock was devised by the Buddhist monk and inventor Yi Xing (683–727). The Chinese engineers Zhang Sixun and Su Song integrated striking clock mechanisms in astronomical clocks in the 10th and 11th centuries, respectively. A striking clock outside of China was the water-powered clock tower near the Umayyad Mosque in Damascus, Syria, which struck once every hour. It was constructed by the Arab engineer al-Kaysarani in 1154. In 1235, an early monumental water-powered alarm clock that "announced the appointed hours of prayer and the time both by day and by night" was completed in the entrance hall of the Mustansiriya Madrasah in Baghdad.
Howard Miller Carmen wrought iron wall clock with cast decorative corner ornaments finished in warm gray, dusty wax highlights. Windsor Cherry finished wood columns provide a warm accent on each side. Convex glass covers the antique dial, which offers black Roman numerals and serpentine hands. The swinging pendulum is finished in warm gray with dusty wax highlights to match the case. Quartz, non-chiming battery operated movement.
The Howard Miller Brassworks II 625-569 is an over-sized, large wall clock showcases a distressed red dial with metal outer frame finished in antique black with brass undertones and highlights. The dial features aged iron-finished gears viewed through an open center. The spade hour and minute hands are finished in antique black with brass undertones and an antique black-finished gear in the center rotates. Quartz, battery-operated movement requires 1 AA battery. One year warranty and Free Shipping.
Antique styling in a two-tone wall clock features a Worn Black finish with red undertones and a contrasting Antique Red inset panel. Beneath a convex glass crystal, the dial features an Antique Red background with gold Arabic numerals and aged brass-tone spade hands. The wood stick pendulum features a spun brass-finished bob. Finished in Worn Black on select materials, hardwoods and veneers. Quartz, non-chiming battery operated movement.
Another type of analog clock is the sundial, which tracks the sun continuously, registering the time by the shadow position of its gnomon. Because the sun does not adjust to daylight saving time, users must add an hour during that time. Corrections must also be made for the equation of time, and for the difference between the longitudes of the sundial and of the central meridian of the time zone that is being used (i.e. 15 degrees east of the prime meridian for each hour that the time zone is ahead of GMT). Sundials use some or part of the 24 hour analog dial. There also exist clocks which use a digital display despite having an analog mechanism—these are commonly referred to as flip clocks. Alternative systems have been proposed. For example, the "Twelv" clock indicates the current hour using one of twelve colors, and indicates the minute by showing a proportion of a circular disk, similar to a moon phase.
The timekeeping part of all weight-driven clocks, including large tower clocks, is substantially the same. The figure shows the mechanism of a simple weight-driven timepiece with a pendulum. The frame is made up of two plates that carry the pivots of the various wheels and other moving parts and that are united and spaced by four pillars. The driving weight hangs from a line coiled around a barrel or sprocket, which is raised by turning the winding square or, in some cases, by pulling on the line. The main wheel engages with the centre pinion, on the arbor (axle) of which is also mounted the centre wheel. The front pivot of this wheel and pinion is lengthened to the right of the illustration; it carries the minute hand and part of the gearing necessary to drive the hour hand.
Clockmakers developed their art in various ways. Building smaller clocks was a technical challenge, as was improving accuracy and reliability. Clocks could be impressive showpieces to demonstrate skilled craftsmanship, or less expensive, mass-produced items for domestic use. The escapement in particular was an important factor affecting the clock's accuracy, so many different mechanisms were tried.