In a clock driven by a weight or a spring, the power is first transmitted by the main, or great, wheel. This engages with a pinion (a gear with a small number of teeth designed to mesh with a larger wheel), whose arbor (a turning rod to which gears are attached) is attached to the second wheel that, in its turn, engages with the next pinion, and so on, down through the train to the escapement. The gear ratios are such that one arbor, usually the second or third, rotates once an hour and can be used to carry the minute hand. A simple 12-to-1 gearing, known as the motion work, gives the necessary step-down ratio to drive the hour hand. The spring or weight is fitted with a mechanism so it can be rewound when necessary, and the arbor carrying the minute hand is provided with a simple slipping clutch that allows the hands to be set to the correct time.
The timekeeping element of a quartz clock consists of a ring of quartz about 2.5 inches (63.5 mm) in diameter, suspended by threads and enclosed in a heat-insulated chamber. Electrodes are attached to the surfaces of the ring and connected to an electrical circuit in such a manner as to sustain oscillations. Since the frequency of vibration, 100,000-hertz, is too high for convenient time measurement, it is reduced by a process known as frequency division or demultiplication and applied to a synchronous motor connected to a clock dial through mechanical gearing. If a 100,000 hertz frequency, for example, is subjected to a combined electrical and mechanical gearing reduction of 6,000,000 to 1, then the second hand of the synchronous clock will make exactly one rotation in 60 seconds. The vibrations are so regular that the maximum error of an observatory quartz-crystal clock is only a few ten-thousandths of a second per day, equivalent to an error of one second every 10 years.
A wall clock is not only a household necessity, but can also be a stylish home accent piece. Features like analog roman numerals or digital displays can reflect a classic or high-tech style, an oversized silver metal clock can turn a wall into a decor feature, and a beautiful and ornate antique piece can lend a stately touch. Available in a wide variety of other designs and themes, choosing a wall clock to complement your decor can be easy and fun.
While an analog dial makes it easy, this clock is certainly not just for telling time! Let its colorful frame imbue a sense of playful appeal into your lodge-inspired living room look, lovely sitting atop your mantel as the fire flickers down below. Whether you're lounging on the sofa after a spirited skiing session or simply warming up with a steaming mug of hot cocoa, you can't go wrong by making the whole room shine with an antler-adorned chandelier hanging overhead and tying it all together...
Remember a time before everything was digital? Yeah… we don’t either. But a few excellent time-tested products pop up out of the woodwork from time to time, and a traditional dual bell alarm clock does the trick. The hands move silently while you sleep, and buzz like a mother when it’s time to rise and shine. If you’re like us, you’re sometimes bothered by LED flashing you in the face all night. With Peakeep Twin Bell Stereoscopic Clock, you simply touch the button to activate the stereoscopic dial backlight, check the time, and they cop-out for another fifteen minutes. Don’t worry – Peakeep will wake you up.
Some clocks have several displays driven by a single mechanism, and some others have several completely separate mechanisms in a single case. Clocks in public places often have several faces visible from different directions, so that the clock can be read from anywhere in the vicinity; all the faces show the same time. Other clocks show the current time in several time-zones. Watches that are intended to be carried by travellers often have two displays, one for the local time and the other for the time at home, which is useful for making pre-arranged phone calls. Some equation clocks have two displays, one showing mean time and the other solar time, as would be shown by a sundial. Some clocks have both analog and digital displays. Clocks with Braille displays usually also have conventional digits so they can be read by sighted people.
This 33" metal wall clock features an antique nickel-finished frame is 7" wide and curves down from the face to the wall hiding the almost 3" in depth. The frame also features 100 decorative nail heads in two rows one on the inside of the frame and one on the outside of the frame.The accurate Quartz movement is operated by one AA battery. One year warranty and Free Shipping.
From the 14th century, some clock towers in Western Europe were also capable of chiming at a fixed time every day; the earliest of these was described by the Florentine writer Dante Alighieri in 1319. The most famous original striking clock tower still standing is possibly the one in St Mark's Clocktower in St Mark's Square, Venice. The St Mark's Clock was assembled in 1493, by the famous clockmaker Gian Carlo Rainieri from Reggio Emilia, where his father Gian Paolo Rainieri had already constructed another famous device in 1481. In 1497, Simone Campanato moulded the great bell (h. 1,56 m., diameter m. 1,27), which was put on the top of the tower where it was alternatively beaten by the Due Mori (Two Moors), two bronze statues (h. 2,60) handling a hammer.
About 1581 Galileo noticed the characteristic timekeeping property of the pendulum. The Dutch astronomer and physicist Christiaan Huygens was responsible for the practical application of the pendulum as a time controller in clocks from 1656 onward. Huygens’s invention brought about a great increase in the importance and extent of clock making. Clocks, weight-driven and with short pendulums, were encased in wood and made to hang on the wall, but these new eight-day wall clocks had very heavy weights, and many fell off weak plaster walls and were destroyed. The next step was to extend the case to the floor, and the grandfather clock was born. In 1670 the long, or seconds, pendulum was introduced by English clock makers with the anchor escapement.
The most accurate mechanical timekeeper is the Shortt pendulum clock; it makes use of the movement described above for electric master clock systems. The Shortt pendulum clock consists of two separate clocks, one of which synchronizes the other. The timekeeping element is a pendulum that swings freely, except that once every half minute it receives an impulse from a gently falling lever. This lever is released by an electrical signal transmitted from its slave clock. After the impulse has been sent, a synchronizing signal is transmitted back to the slave clock that ensures that the impulse to the free pendulum will be released exactly a half minute later than the previous impulse. The pendulum swings in a sealed box in which the air is kept at a constant, low pressure. Shortt clocks in observatories are kept in a room, usually a basement, where the temperature remains nearly constant, and under these conditions they can maintain the correct time to within a few thousandths of a second per day.
With it's quality construction and stylish mid-century modern design, the 31.5" Rumi Mid Century Wall Clock is an attractive accent for the home. Crafted entirely of iron, this large wall clock features a dark brown distressed finish and large distressed gold hands. Minimalism is reflected in the clock's open pass-through design. This clock is a must-have for anyone in search of mid-century modern inspired decor.
“Love how simple this digital timer is. I travel a lot, and it’s small enough to put in my purse. The off button is convenient because it keeps the buttons from being pressed while stored away and conserves the battery, but when you turn it back on, your setting are stored so no need to reset [each] time. … [There’s just the] clock, alarm, snooze, on/off. The smaller and simpler the better when I’m traveling.”