Howard Miller Carmen wrought iron wall clock with cast decorative corner ornaments finished in warm gray, dusty wax highlights. Windsor Cherry finished wood columns provide a warm accent on each side. Convex glass covers the antique dial, which offers black Roman numerals and serpentine hands. The swinging pendulum is finished in warm gray with dusty wax highlights to match the case. Quartz, non-chiming battery operated movement.
Some clocks, called 'flip clocks', have digital displays that work mechanically. The digits are painted on sheets of material which are mounted like the pages of a book. Once a minute, a page is turned over to reveal the next digit. These displays are usually easier to read in brightly lit conditions than LCDs or LEDs. Also, they do not go back to 12:00 after a power interruption. Flip clocks generally do not have electronic mechanisms. Usually, they are driven by AC-synchronous motors.
From the 14th century, some clock towers in Western Europe were also capable of chiming at a fixed time every day; the earliest of these was described by the Florentine writer Dante Alighieri in 1319. The most famous original striking clock tower still standing is possibly the one in St Mark's Clocktower in St Mark's Square, Venice. The St Mark's Clock was assembled in 1493, by the famous clockmaker Gian Carlo Rainieri from Reggio Emilia, where his father Gian Paolo Rainieri had already constructed another famous device in 1481. In 1497, Simone Campanato moulded the great bell (h. 1,56 m., diameter m. 1,27), which was put on the top of the tower where it was alternatively beaten by the Due Mori (Two Moors), two bronze statues (h. 2,60) handling a hammer.
Although the mechanisms they use vary, all oscillating clocks, mechanical, digital and atomic, work similarly and can be divided into analogous parts. They consist of an object that repeats the same motion over and over again, an oscillator, with a precisely constant time interval between each repetition, or 'beat'. Attached to the oscillator is a controller device, which sustains the oscillator's motion by replacing the energy it loses to friction, and converts its oscillations into a series of pulses. The pulses are then counted by some type of counter, and the number of counts is converted into convenient units, usually seconds, minutes, hours, etc. Finally some kind of indicator displays the result in human readable form.
If the last thing you do before closing your eyes for the night is pick up your cell phone to set the alarm, how likely is it that you're just going to do that one thing, then set the phone down on the nightstand? Admit it, you're probably going to check your Instagram, send a text or two, play just one more round of your favorite game, or surf the web.
About 1450, clockmakers working probably in southern Germany or northern Italy began to make small clocks driven by a spring. These were the first portable timepieces, representing an important landmark in horology. The time-telling dials of these clocks usually had an hour hand only (minute hands did not generally appear until the 1650s) and were exposed to the air; there was normally no form of cover such as a glass until the 17th century, though the mechanism was enclosed, and the cases were made of brass.
It is undesirable to give someone a clock or (depending on the region) other timepiece as a gift. Traditional superstitions regard this as counting the seconds to the recipient's death. Another common interpretation of this is that the phrase "to give a clock" (simplified Chinese: 送钟; traditional Chinese: 送鐘) in Chinese is pronounced "sòng zhōng" in Mandarin, which is a homophone of a phrase for "terminating" or "attending a funeral" (both can be written as 送終 (traditional) or 送终 (simplified)). Cantonese people consider such a gift as a curse.