Clock radios are powered by AC power from the wall socket. In the event of a power interruption, older electronic digital models used to reset the time to midnight (00:00) and lose alarm settings. This would cause failure to trigger the alarm even if the power is restored. To solve this issue, they trigger the alarm at 00:01 after a reset, so that at least the user is able to correct the clock and alarm settings. Most of the recent clock radios use a battery backup to maintain the time and alarm settings. Some advanced radio clocks (not to be confused with clocks with AM/FM radios) have a feature which sets the time automatically using signals from atomic clock-synced time signal radio stations such as WWV, making the clock accurate and immune to time reset due to power interruptions.
The pendulum is a reliable time measurer because, for small arcs, the time required for a complete swing (period) depends only on the length of the pendulum and is almost independent of the extent of the arc. The length of a pendulum with a period of one second is about 39 inches (990 mm), and an increase in length of 0.001 inch (0.025 mm) will make the clock lose about one second per day. Altering the length of a pendulum is therefore a sensitive means of regulation. The alteration is usually carried out by allowing the bob to rest upon a nut that can be screwed up or down the pendulum rod.
“I am the heaviest sleeper and was setting four or five alarms on my phone to wake me up. After being late a few times, I decided to purchase this alarm clock to help me wake up on time. I couldn’t be happier with my purchase. … The bed shaker is super important. I put it under my pillow, and it shook me awake; the loud beep helped too. If you can sleep through earthquakes and shouting family members, this is the alarm clock for you.”
×