Some water clock designs were developed independently and some knowledge was transferred through the spread of trade. Pre-modern societies do not have the same precise timekeeping requirements that exist in modern industrial societies, where every hour of work or rest is monitored, and work may start or finish at any time regardless of external conditions. Instead, water clocks in ancient societies were used mainly for astrological reasons. These early water clocks were calibrated with a sundial. While never reaching the level of accuracy of a modern timepiece, the water clock was the most accurate and commonly used timekeeping device for millennia, until it was replaced by the more accurate pendulum clock in 17th-century Europe.

This selection offers an analog display with hands and a built-in digital wall clock. Metallic gray wall clock with a flat bezel framing the dial. White dial with large black Arabic numerals, black hour, minute and second hands beneath a glass crystal. LCD calendar in the dial displays the month, date, and day of the week. Quartz, battery operated movement.
A clock radio is an alarm clock and radio receiver integrated in one device. The clock may turn on the radio at a designated time to wake the user, and may also include a buzzer. Typically, they are placed on the bedside stand. Some models offer dual alarm and "snooze", a large button on the top that stops the alarm and sets it to ring again a few minutes later.[18] Some clock radios also have a "sleep" timer, which turns the music from radio on for a set amount of time (usually around one hour). This is useful for people who like to fall asleep with the radio on.
Some clocks, called 'flip clocks', have digital displays that work mechanically. The digits are painted on sheets of material which are mounted like the pages of a book. Once a minute, a page is turned over to reveal the next digit. These displays are usually easier to read in brightly lit conditions than LCDs or LEDs. Also, they do not go back to 12:00 after a power interruption. Flip clocks generally do not have electronic mechanisms. Usually, they are driven by AC-synchronous motors.
Never squint to see what time it is again, especially when you're waking up 20 times in the middle of the night to, you know, see exactly what time it is. We love the projection feature that displays the time on your wall or ceiling for easy viewing. Plus, it'll even toss up the temperature — so you'll already know what you should wear to work before you even get out of bed.
A well-made large wall clock that looks good and runs smoothly can add charm and functionality to any space. For a fresh take on the traditional clock, consider this eye-catching design... Introducing Madera Wall Clock by Umbra This beautiful, modern clock has a wood veneer dial, aluminum bezel, and glass lens. Inspired by modern wristwatches Madera is intended to serve as a finishing touch for any space. Featuring a silent sweeping quartz mechanism, this wall clocks battery operated design...
The pendulum is a reliable time measurer because, for small arcs, the time required for a complete swing (period) depends only on the length of the pendulum and is almost independent of the extent of the arc. The length of a pendulum with a period of one second is about 39 inches (990 mm), and an increase in length of 0.001 inch (0.025 mm) will make the clock lose about one second per day. Altering the length of a pendulum is therefore a sensitive means of regulation. The alteration is usually carried out by allowing the bob to rest upon a nut that can be screwed up or down the pendulum rod.
In a clock driven by a weight or a spring, the power is first transmitted by the main, or great, wheel. This engages with a pinion (a gear with a small number of teeth designed to mesh with a larger wheel), whose arbor (a turning rod to which gears are attached) is attached to the second wheel that, in its turn, engages with the next pinion, and so on, down through the train to the escapement. The gear ratios are such that one arbor, usually the second or third, rotates once an hour and can be used to carry the minute hand. A simple 12-to-1 gearing, known as the motion work, gives the necessary step-down ratio to drive the hour hand. The spring or weight is fitted with a mechanism so it can be rewound when necessary, and the arbor carrying the minute hand is provided with a simple slipping clutch that allows the hands to be set to the correct time.
In China, a striking clock was devised by the Buddhist monk and inventor Yi Xing (683–727).[5] The Chinese engineers Zhang Sixun and Su Song integrated striking clock mechanisms in astronomical clocks in the 10th and 11th centuries, respectively.[6] A striking clock outside of China was the water-powered clock tower near the Umayyad Mosque in Damascus, Syria, which struck once every hour. It was constructed by the Arab engineer al-Kaysarani in 1154. In 1235, an early monumental water-powered alarm clock that "announced the appointed hours of prayer and the time both by day and by night" was completed in the entrance hall of the Mustansiriya Madrasah in Baghdad.[7]
“Love how simple this digital timer is. I travel a lot, and it’s small enough to put in my purse. The off button is convenient because it keeps the buttons from being pressed while stored away and conserves the battery, but when you turn it back on, your setting are stored so no need to reset [each] time. … [There’s just the] clock, alarm, snooze, on/off. The smaller and simpler the better when I’m traveling.”